Project ID: plumID:21.030
Source: plumed-nest/npm/cn.dat
Originally used with PLUMED version: 2.4
Stable: zipped raw stdout - zipped raw stderr - stderr
Master: zipped raw stdout - zipped raw stderr - stderr
Click on the labels of the actions for more information on what each action computes
r1The COM action with label r1 calculates the following quantities:| Quantity | Type | Description |
| r1 | atoms | virtual atom calculated by COM action |
: COMCalculate the center of mass for a group of atoms. More details ATOMSthe list of atoms which are involved the virtual atom's definition=10,19
r2The COM action with label r2 calculates the following quantities:| Quantity | Type | Description |
| r2 | atoms | virtual atom calculated by COM action |
: COMCalculate the center of mass for a group of atoms. More details ATOMSthe list of atoms which are involved the virtual atom's definition=35,44
r3The COM action with label r3 calculates the following quantities:| Quantity | Type | Description |
| r3 | atoms | virtual atom calculated by COM action |
: COMCalculate the center of mass for a group of atoms. More details ATOMSthe list of atoms which are involved the virtual atom's definition=55,64
r4The COM action with label r4 calculates the following quantities:| Quantity | Type | Description |
| r4 | atoms | virtual atom calculated by COM action |
: COMCalculate the center of mass for a group of atoms. More details ATOMSthe list of atoms which are involved the virtual atom's definition=75,84
r5The COM action with label r5 calculates the following quantities:| Quantity | Type | Description |
| r5 | atoms | virtual atom calculated by COM action |
: COMCalculate the center of mass for a group of atoms. More details ATOMSthe list of atoms which are involved the virtual atom's definition=95,104
r6The COM action with label r6 calculates the following quantities:| Quantity | Type | Description |
| r6 | atoms | virtual atom calculated by COM action |
: COMCalculate the center of mass for a group of atoms. More details ATOMSthe list of atoms which are involved the virtual atom's definition=115,124
r7The COM action with label r7 calculates the following quantities:| Quantity | Type | Description |
| r7 | atoms | virtual atom calculated by COM action |
: COMCalculate the center of mass for a group of atoms. More details ATOMSthe list of atoms which are involved the virtual atom's definition=135,144
r8The COM action with label r8 calculates the following quantities:| Quantity | Type | Description |
| r8 | atoms | virtual atom calculated by COM action |
: COMCalculate the center of mass for a group of atoms. More details ATOMSthe list of atoms which are involved the virtual atom's definition=155,164
r9The COM action with label r9 calculates the following quantities:| Quantity | Type | Description |
| r9 | atoms | virtual atom calculated by COM action |
: COMCalculate the center of mass for a group of atoms. More details ATOMSthe list of atoms which are involved the virtual atom's definition=175,184
r10The COM action with label r10 calculates the following quantities:| Quantity | Type | Description |
| r10 | atoms | virtual atom calculated by COM action |
: COMCalculate the center of mass for a group of atoms. More details ATOMSthe list of atoms which are involved the virtual atom's definition=195,204
r11The COM action with label r11 calculates the following quantities:| Quantity | Type | Description |
| r11 | atoms | virtual atom calculated by COM action |
: COMCalculate the center of mass for a group of atoms. More details ATOMSthe list of atoms which are involved the virtual atom's definition=215,224
r12The COM action with label r12 calculates the following quantities:| Quantity | Type | Description |
| r12 | atoms | virtual atom calculated by COM action |
: COMCalculate the center of mass for a group of atoms. More details ATOMSthe list of atoms which are involved the virtual atom's definition=234,243
d1-2The DISTANCE action with label d1-2 calculates the following quantities:| Quantity | Type | Description |
| d1-2 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r1,r2
d1-3The DISTANCE action with label d1-3 calculates the following quantities:| Quantity | Type | Description |
| d1-3 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r1,r3
d1-4The DISTANCE action with label d1-4 calculates the following quantities:| Quantity | Type | Description |
| d1-4 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r1,r4
d1-5The DISTANCE action with label d1-5 calculates the following quantities:| Quantity | Type | Description |
| d1-5 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r1,r5
d1-6The DISTANCE action with label d1-6 calculates the following quantities:| Quantity | Type | Description |
| d1-6 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r1,r6
d1-7The DISTANCE action with label d1-7 calculates the following quantities:| Quantity | Type | Description |
| d1-7 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r1,r7
d1-8The DISTANCE action with label d1-8 calculates the following quantities:| Quantity | Type | Description |
| d1-8 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r1,r8
d1-9The DISTANCE action with label d1-9 calculates the following quantities:| Quantity | Type | Description |
| d1-9 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r1,r9
d1-10The DISTANCE action with label d1-10 calculates the following quantities:| Quantity | Type | Description |
| d1-10 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r1,r10
d1-11The DISTANCE action with label d1-11 calculates the following quantities:| Quantity | Type | Description |
| d1-11 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r1,r11
d1-12The DISTANCE action with label d1-12 calculates the following quantities:| Quantity | Type | Description |
| d1-12 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r1,r12
d2-3The DISTANCE action with label d2-3 calculates the following quantities:| Quantity | Type | Description |
| d2-3 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r2,r3
d2-4The DISTANCE action with label d2-4 calculates the following quantities:| Quantity | Type | Description |
| d2-4 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r2,r4
d2-5The DISTANCE action with label d2-5 calculates the following quantities:| Quantity | Type | Description |
| d2-5 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r2,r5
d2-6The DISTANCE action with label d2-6 calculates the following quantities:| Quantity | Type | Description |
| d2-6 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r2,r6
d2-7The DISTANCE action with label d2-7 calculates the following quantities:| Quantity | Type | Description |
| d2-7 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r2,r7
d2-8The DISTANCE action with label d2-8 calculates the following quantities:| Quantity | Type | Description |
| d2-8 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r2,r8
d2-9The DISTANCE action with label d2-9 calculates the following quantities:| Quantity | Type | Description |
| d2-9 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r2,r9
d2-10The DISTANCE action with label d2-10 calculates the following quantities:| Quantity | Type | Description |
| d2-10 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r2,r10
d2-11The DISTANCE action with label d2-11 calculates the following quantities:| Quantity | Type | Description |
| d2-11 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r2,r11
d2-12The DISTANCE action with label d2-12 calculates the following quantities:| Quantity | Type | Description |
| d2-12 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r2,r12
d3-4The DISTANCE action with label d3-4 calculates the following quantities:| Quantity | Type | Description |
| d3-4 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r3,r4
d3-5The DISTANCE action with label d3-5 calculates the following quantities:| Quantity | Type | Description |
| d3-5 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r3,r5
d3-6The DISTANCE action with label d3-6 calculates the following quantities:| Quantity | Type | Description |
| d3-6 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r3,r6
d3-7The DISTANCE action with label d3-7 calculates the following quantities:| Quantity | Type | Description |
| d3-7 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r3,r7
d3-8The DISTANCE action with label d3-8 calculates the following quantities:| Quantity | Type | Description |
| d3-8 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r3,r8
d3-9The DISTANCE action with label d3-9 calculates the following quantities:| Quantity | Type | Description |
| d3-9 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r3,r9
d3-10The DISTANCE action with label d3-10 calculates the following quantities:| Quantity | Type | Description |
| d3-10 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r3,r10
d3-11The DISTANCE action with label d3-11 calculates the following quantities:| Quantity | Type | Description |
| d3-11 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r3,r11
d3-12The DISTANCE action with label d3-12 calculates the following quantities:| Quantity | Type | Description |
| d3-12 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r3,r12
d4-5The DISTANCE action with label d4-5 calculates the following quantities:| Quantity | Type | Description |
| d4-5 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r4,r5
d4-6The DISTANCE action with label d4-6 calculates the following quantities:| Quantity | Type | Description |
| d4-6 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r4,r6
d4-7The DISTANCE action with label d4-7 calculates the following quantities:| Quantity | Type | Description |
| d4-7 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r4,r7
d4-8The DISTANCE action with label d4-8 calculates the following quantities:| Quantity | Type | Description |
| d4-8 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r4,r8
d4-9The DISTANCE action with label d4-9 calculates the following quantities:| Quantity | Type | Description |
| d4-9 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r4,r9
d4-10The DISTANCE action with label d4-10 calculates the following quantities:| Quantity | Type | Description |
| d4-10 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r4,r10
d4-11The DISTANCE action with label d4-11 calculates the following quantities:| Quantity | Type | Description |
| d4-11 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r4,r11
d4-12The DISTANCE action with label d4-12 calculates the following quantities:| Quantity | Type | Description |
| d4-12 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r4,r12
d5-6The DISTANCE action with label d5-6 calculates the following quantities:| Quantity | Type | Description |
| d5-6 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r5,r6
d5-7The DISTANCE action with label d5-7 calculates the following quantities:| Quantity | Type | Description |
| d5-7 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r5,r7
d5-8The DISTANCE action with label d5-8 calculates the following quantities:| Quantity | Type | Description |
| d5-8 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r5,r8
d5-9The DISTANCE action with label d5-9 calculates the following quantities:| Quantity | Type | Description |
| d5-9 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r5,r9
d5-10The DISTANCE action with label d5-10 calculates the following quantities:| Quantity | Type | Description |
| d5-10 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r5,r10
d5-11The DISTANCE action with label d5-11 calculates the following quantities:| Quantity | Type | Description |
| d5-11 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r5,r11
d5-12The DISTANCE action with label d5-12 calculates the following quantities:| Quantity | Type | Description |
| d5-12 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r5,r12
d6-7The DISTANCE action with label d6-7 calculates the following quantities:| Quantity | Type | Description |
| d6-7 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r6,r7
d6-8The DISTANCE action with label d6-8 calculates the following quantities:| Quantity | Type | Description |
| d6-8 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r6,r8
d6-9The DISTANCE action with label d6-9 calculates the following quantities:| Quantity | Type | Description |
| d6-9 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r6,r9
d6-10The DISTANCE action with label d6-10 calculates the following quantities:| Quantity | Type | Description |
| d6-10 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r6,r10
d6-11The DISTANCE action with label d6-11 calculates the following quantities:| Quantity | Type | Description |
| d6-11 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r6,r11
d6-12The DISTANCE action with label d6-12 calculates the following quantities:| Quantity | Type | Description |
| d6-12 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r6,r12
d7-8The DISTANCE action with label d7-8 calculates the following quantities:| Quantity | Type | Description |
| d7-8 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r7,r8
d7-9The DISTANCE action with label d7-9 calculates the following quantities:| Quantity | Type | Description |
| d7-9 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r7,r9
d7-10The DISTANCE action with label d7-10 calculates the following quantities:| Quantity | Type | Description |
| d7-10 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r7,r10
d7-11The DISTANCE action with label d7-11 calculates the following quantities:| Quantity | Type | Description |
| d7-11 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r7,r11
d7-12The DISTANCE action with label d7-12 calculates the following quantities:| Quantity | Type | Description |
| d7-12 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r7,r12
d8-9The DISTANCE action with label d8-9 calculates the following quantities:| Quantity | Type | Description |
| d8-9 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r8,r9
d8-10The DISTANCE action with label d8-10 calculates the following quantities:| Quantity | Type | Description |
| d8-10 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r8,r10
d8-11The DISTANCE action with label d8-11 calculates the following quantities:| Quantity | Type | Description |
| d8-11 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r8,r11
d8-12The DISTANCE action with label d8-12 calculates the following quantities:| Quantity | Type | Description |
| d8-12 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r8,r12
d9-10The DISTANCE action with label d9-10 calculates the following quantities:| Quantity | Type | Description |
| d9-10 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r9,r10
d9-11The DISTANCE action with label d9-11 calculates the following quantities:| Quantity | Type | Description |
| d9-11 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r9,r11
d9-12The DISTANCE action with label d9-12 calculates the following quantities:| Quantity | Type | Description |
| d9-12 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r9,r12
d10-11The DISTANCE action with label d10-11 calculates the following quantities:| Quantity | Type | Description |
| d10-11 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r10,r11
d10-12The DISTANCE action with label d10-12 calculates the following quantities:| Quantity | Type | Description |
| d10-12 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r10,r12
d11-12The DISTANCE action with label d11-12 calculates the following quantities:| Quantity | Type | Description |
| d11-12 | scalar | the DISTANCE between this pair of atoms |
: DISTANCECalculate the distance/s between pairs of atoms. More details ATOMSthe pair of atom that we are calculating the distance between=r11,r12
cThe COORDINATION action with label c calculates the following quantities:| Quantity | Type | Description |
| c | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r1,r1,r1,r1,r1,r1,r1,r1,r1,r1,r1,r2,r2,r2,r2,r2,r2,r2,r2,r2,r2,r3,r3,r3,r3,r3,r3,r3,r3,r3,r4,r4,r4,r4,r4,r4,r4,r4,r5,r5,r5,r5,r5,r5,r5,r6,r6,r6,r6,r6,r6,r7,r7,r7,r7,r7,r8,r8,r8,r8,r9,r9,r9,r10,r10,r11 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,r4,r5,r6,r7,r8,r9,r10,r11,r12,r5,r6,r7,r8,r9,r10,r11,r12,r6,r7,r8,r9,r10,r11,r12,r7,r8,r9,r10,r11,r12,r8,r9,r10,r11,r12,r9,r10,r11,r12,r10,r11,r12,r11,r12,r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 PAIR Pair only 1st element of the 1st group with 1st element in the second, etc
c: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r1,r1,r1,r1,r1,r1,r1,r1,r1,r1,r1,r2,r2,r2,r2,r2,r2,r2,r2,r2,r2,r3,r3,r3,r3,r3,r3,r3,r3,r3,r4,r4,r4,r4,r4,r4,r4,r4,r5,r5,r5,r5,r5,r5,r5,r6,r6,r6,r6,r6,r6,r7,r7,r7,r7,r7,r8,r8,r8,r8,r9,r9,r9,r10,r10,r11 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,r4,r5,r6,r7,r8,r9,r10,r11,r12,r5,r6,r7,r8,r9,r10,r11,r12,r6,r7,r8,r9,r10,r11,r12,r7,r8,r9,r10,r11,r12,r8,r9,r10,r11,r12,r9,r10,r11,r12,r10,r11,r12,r11,r12,r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 PAIR Pair only 1st element of the 1st group with 1st element in the second, etc D_0 The d_0 parameter of the switching function=0.0
c1The COORDINATION action with label c1 calculates the following quantities:| Quantity | Type | Description |
| c1 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r2 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c1: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r2 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c2The COORDINATION action with label c2 calculates the following quantities:| Quantity | Type | Description |
| c2 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r3 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c2: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r3 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c3The COORDINATION action with label c3 calculates the following quantities:| Quantity | Type | Description |
| c3 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r4 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c3: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r4 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c4The COORDINATION action with label c4 calculates the following quantities:| Quantity | Type | Description |
| c4 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r5 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c4: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r5 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c5The COORDINATION action with label c5 calculates the following quantities:| Quantity | Type | Description |
| c5 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r6 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c5: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r6 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c6The COORDINATION action with label c6 calculates the following quantities:| Quantity | Type | Description |
| c6 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r7 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c6: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r7 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c7The COORDINATION action with label c7 calculates the following quantities:| Quantity | Type | Description |
| c7 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r8 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c7: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r8 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c8The COORDINATION action with label c8 calculates the following quantities:| Quantity | Type | Description |
| c8 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r9 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c8: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r9 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c9The COORDINATION action with label c9 calculates the following quantities:| Quantity | Type | Description |
| c9 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c9: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c10The COORDINATION action with label c10 calculates the following quantities:| Quantity | Type | Description |
| c10 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c10: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c11The COORDINATION action with label c11 calculates the following quantities:| Quantity | Type | Description |
| c11 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c11: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r1 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c12The COORDINATION action with label c12 calculates the following quantities:| Quantity | Type | Description |
| c12 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r3 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c12: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r3 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c13The COORDINATION action with label c13 calculates the following quantities:| Quantity | Type | Description |
| c13 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r4 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c13: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r4 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c14The COORDINATION action with label c14 calculates the following quantities:| Quantity | Type | Description |
| c14 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r5 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c14: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r5 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c15The COORDINATION action with label c15 calculates the following quantities:| Quantity | Type | Description |
| c15 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r6 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c15: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r6 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c16The COORDINATION action with label c16 calculates the following quantities:| Quantity | Type | Description |
| c16 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r7 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c16: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r7 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c17The COORDINATION action with label c17 calculates the following quantities:| Quantity | Type | Description |
| c17 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r8 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c17: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r8 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c18The COORDINATION action with label c18 calculates the following quantities:| Quantity | Type | Description |
| c18 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r9 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c18: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r9 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c19The COORDINATION action with label c19 calculates the following quantities:| Quantity | Type | Description |
| c19 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c19: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c20The COORDINATION action with label c20 calculates the following quantities:| Quantity | Type | Description |
| c20 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c20: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c21The COORDINATION action with label c21 calculates the following quantities:| Quantity | Type | Description |
| c21 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c21: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r2 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c22The COORDINATION action with label c22 calculates the following quantities:| Quantity | Type | Description |
| c22 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r4 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c22: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r4 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c23The COORDINATION action with label c23 calculates the following quantities:| Quantity | Type | Description |
| c23 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r5 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c23: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r5 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c24The COORDINATION action with label c24 calculates the following quantities:| Quantity | Type | Description |
| c24 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r6 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c24: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r6 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c25The COORDINATION action with label c25 calculates the following quantities:| Quantity | Type | Description |
| c25 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r7 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c25: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r7 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c26The COORDINATION action with label c26 calculates the following quantities:| Quantity | Type | Description |
| c26 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r8 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c26: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r8 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c27The COORDINATION action with label c27 calculates the following quantities:| Quantity | Type | Description |
| c27 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r9 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c27: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r9 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c28The COORDINATION action with label c28 calculates the following quantities:| Quantity | Type | Description |
| c28 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c28: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c29The COORDINATION action with label c29 calculates the following quantities:| Quantity | Type | Description |
| c29 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c29: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c30The COORDINATION action with label c30 calculates the following quantities:| Quantity | Type | Description |
| c30 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c30: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r3 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c31The COORDINATION action with label c31 calculates the following quantities:| Quantity | Type | Description |
| c31 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r4 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r5 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c31: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r4 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r5 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c32The COORDINATION action with label c32 calculates the following quantities:| Quantity | Type | Description |
| c32 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r4 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r6 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c32: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r4 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r6 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c33The COORDINATION action with label c33 calculates the following quantities:| Quantity | Type | Description |
| c33 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r4 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r7 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c33: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r4 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r7 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c34The COORDINATION action with label c34 calculates the following quantities:| Quantity | Type | Description |
| c34 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r4 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r8 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c34: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r4 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r8 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c35The COORDINATION action with label c35 calculates the following quantities:| Quantity | Type | Description |
| c35 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r4 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r9 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c35: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r4 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r9 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c36The COORDINATION action with label c36 calculates the following quantities:| Quantity | Type | Description |
| c36 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r4 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c36: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r4 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c37The COORDINATION action with label c37 calculates the following quantities:| Quantity | Type | Description |
| c37 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r4 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c37: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r4 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c38The COORDINATION action with label c38 calculates the following quantities:| Quantity | Type | Description |
| c38 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r4 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c38: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r4 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c39The COORDINATION action with label c39 calculates the following quantities:| Quantity | Type | Description |
| c39 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r5 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r6 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c39: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r5 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r6 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c40The COORDINATION action with label c40 calculates the following quantities:| Quantity | Type | Description |
| c40 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r5 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r7 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c40: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r5 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r7 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c41The COORDINATION action with label c41 calculates the following quantities:| Quantity | Type | Description |
| c41 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r5 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r8 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c41: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r5 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r8 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c42The COORDINATION action with label c42 calculates the following quantities:| Quantity | Type | Description |
| c42 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r5 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r9 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c42: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r5 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r9 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c43The COORDINATION action with label c43 calculates the following quantities:| Quantity | Type | Description |
| c43 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r5 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c43: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r5 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c44The COORDINATION action with label c44 calculates the following quantities:| Quantity | Type | Description |
| c44 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r5 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c44: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r5 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c45The COORDINATION action with label c45 calculates the following quantities:| Quantity | Type | Description |
| c45 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r5 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c45: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r5 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c46The COORDINATION action with label c46 calculates the following quantities:| Quantity | Type | Description |
| c46 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r6 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r7 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c46: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r6 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r7 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c47The COORDINATION action with label c47 calculates the following quantities:| Quantity | Type | Description |
| c47 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r6 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r8 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c47: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r6 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r8 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c48The COORDINATION action with label c48 calculates the following quantities:| Quantity | Type | Description |
| c48 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r6 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r9 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c48: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r6 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r9 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c49The COORDINATION action with label c49 calculates the following quantities:| Quantity | Type | Description |
| c49 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r6 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c49: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r6 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c50The COORDINATION action with label c50 calculates the following quantities:| Quantity | Type | Description |
| c50 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r6 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c50: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r6 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c51The COORDINATION action with label c51 calculates the following quantities:| Quantity | Type | Description |
| c51 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r6 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c51: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r6 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c52The COORDINATION action with label c52 calculates the following quantities:| Quantity | Type | Description |
| c52 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r7 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r8 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c52: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r7 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r8 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c53The COORDINATION action with label c53 calculates the following quantities:| Quantity | Type | Description |
| c53 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r7 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r9 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c53: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r7 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r9 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c54The COORDINATION action with label c54 calculates the following quantities:| Quantity | Type | Description |
| c54 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r7 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c54: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r7 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c55The COORDINATION action with label c55 calculates the following quantities:| Quantity | Type | Description |
| c55 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r7 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c55: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r7 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c56The COORDINATION action with label c56 calculates the following quantities:| Quantity | Type | Description |
| c56 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r7 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c56: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r7 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c57The COORDINATION action with label c57 calculates the following quantities:| Quantity | Type | Description |
| c57 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r8 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r9 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c57: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r8 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r9 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c58The COORDINATION action with label c58 calculates the following quantities:| Quantity | Type | Description |
| c58 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r8 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c58: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r8 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c59The COORDINATION action with label c59 calculates the following quantities:| Quantity | Type | Description |
| c59 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r8 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c59: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r8 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c60The COORDINATION action with label c60 calculates the following quantities:| Quantity | Type | Description |
| c60 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r8 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c60: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r8 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c61The COORDINATION action with label c61 calculates the following quantities:| Quantity | Type | Description |
| c61 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r9 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c61: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r9 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r10 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c62The COORDINATION action with label c62 calculates the following quantities:| Quantity | Type | Description |
| c62 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r9 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c62: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r9 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c63The COORDINATION action with label c63 calculates the following quantities:| Quantity | Type | Description |
| c63 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r9 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c63: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r9 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c64The COORDINATION action with label c64 calculates the following quantities:| Quantity | Type | Description |
| c64 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r10 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c64: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r10 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r11 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c65The COORDINATION action with label c65 calculates the following quantities:| Quantity | Type | Description |
| c65 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r10 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c65: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r10 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
c66The COORDINATION action with label c66 calculates the following quantities:| Quantity | Type | Description |
| c66 | scalar | the value of the coordination |
: COORDINATIONCalculate coordination numbers. This action has hidden defaults. More details GROUPAFirst list of atoms=r11 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10
c66: COORDINATIONCalculate coordination numbers. This action uses the defaults shown here. More details GROUPAFirst list of atoms=r11 GROUPBSecond list of atoms (if empty, N*(N-1)/2 pairs in GROUPA are counted)=r12 R_0The r_0 parameter of the switching function=0.5 NN The n parameter of the switching function =8 MM The m parameter of the switching function; 0 implies 2*NN=12 NLIST Use a neighbor list to speed up the calculation NL_CUTOFFThe cutoff for the neighbor list=0.75 NL_STRIDEThe frequency with which we are updating the atoms in the neighbor list=10 D_0 The d_0 parameter of the switching function=0.0
